PURE Elan Connect+ - WPS Setup and Connection Completion; WPS Connection Methods; Skip WPS Option; Network Connection Status

WPS setup
WPS encrypted networks are identified by ‘[WPS]’ at the start of the Network name, and have two methods of
connection. Select one and follow the prompts. When using the network wizard an additional option to Skip
WPS is available.
Select one and follow the prompts:
• Push Button >
Elan Connect/+ prompts you to press the connect button on the router. It then presses the select control.
• Pin > (code number)
Elan Connect/+ generates an 8-digit code number which you enter into the wireless router, access point.
• Skip WPS >
Enter key as for a standard encrypted network, above. For more information on setting up a WPS encrypted
network, see your WPS router’s instructions.
On completion
Elan Connect/+ connects to the selected network.
If connecting fails, Elan Connect/+ returns to a previous screen to try again. To exit the process use the Back/
Menu button.
Note: Elan Connect/+ remembers the last four wireless networks it has connected to, and automatically tries
to connect to whichever one of them it can find. You can see the list of registered networks through Menu >
System settings >Network > Network profile >From here you can delete unwanted networks by turning and
pressing Select then confirming delete Yes.
There are also other options for viewing and manually altering network settings from Menu > System settings >
Network.
Users experienced with networking may find these options useful for diagnosing and fixing network problems.