7
5. Select ‘Set days’. Choose when you want the alarm to repeat by pressing +/− to choose and
Select to confirm. The following options are available:
Daily Every day.
Weekday Monday − Friday, every week.
Weekend Every weekend.
Saturday Every Saturday.
Sunday Every Sunday
Once only The alarm will sound at the time you have selected and not recur.
6. Select ‘Set Mode’ to choose the type of alarm you want: DAB, FM or Tone.
If you select DAB or FM the alarm will tune to the station that was most recently listened to.
7. Finally, set the volume of the alarm from 1 to 20 using the +/- buttons
(not applicable for tone alarms).
That’s it! You can easily see which alarms are currently switched on by looking at the
alarm bell icons on the screen, in either active or standby mode. When an alarm is sounding,
the alarm clock icon will flash.
For example:
Changing an alarm that you have set
You can change the settings for an alarm by pressing Alarm and adjusting the settings as
described above. Remember, you can do this when Milano is switched on or in standby.
If you want to set
a ‘one-off’ alarm
choose ‘Once only’.
Setting alarms
Set Mode
DAB
Tone
DAB
Alarm volume
08
11 set volume
09
go online now to
BBC Radio 1
Alarm 1 is
currently
switched on
To Next Page
Loading...
