PURE ONE Flow Owner's Manual

6
Side panel controls and connectors
Standby
Press to switch One Flow between Sleep, Standby and On.
See below for more information.
Note: If One Flow is being powered by ChargePAK E1,
pressing Standby will switch One Flow off.
Mini USB socket
For software updates and Pure Mini USB
Ethernet adapter.
3.5mm stereo headphone socket
Aux in
You can use One Flow to listen to audio
stored on an iPod or other portable music
player. You will need a suitable 3.5mm to
3.5mm auxiliary lead (not supplied).
Switching between Sleep, Standby and On
One Flow has three power modes, Standby, Sleep and On. In Standby, One Flow uses minimal power.
In Sleep mode, One Flow remains connected to the wireless network (once attached) and is ready to
stream audio using the Pure Connect app. See page 10 for more information.
To enter Sleep mode, press Standby.
To enter Standby mode, press and hold Standby.
Once in Sleep/Standby mode, press Standby to switch to On.

PURE ONE Flow Specifications

General

Radio type	Portable
Tuner type	Digital
PLL synthesizer	-
Supported radio bands	DAB, DAB+, DMB, FM
Preset stations quantity	40
RMS rated power	2.5 W
Audio formats supported	AAC, MP2, MP3, WMA
Number of built-in speakers	1
Subwoofer driver diameter (imperial)	3.5 \
Display type	LED
Backlight color	Green
Display resolution	128 x 64 pixels
Ethernet LAN	No
Wi-Fi standards	802.11b, 802.11g
Input voltage	100-240 V
Security algorithms	WEP, WPA, WPA2
Apple docking compatibility	Not supported
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Product color	Black
Volume control	Rotary
Cables included	AC
Certification	CE, EMC, ETSI, EN
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	80 mm
Width	207 mm
Height	147 mm
Weight	650 g