PURE VR1 - Basic Maintenance

6
1. Periodically ensure all bolts are tight.
2. Add 1 purication tablet every 6 months. To request extra purication tablets,
visit www.puredesigntness.com.
3. Keep rail and seat wheels clean by using a damp cloth. Avoid using any
chemicals.
4. If, during the recoil phase, the handle does not return towards the front of the
machine smoothly, you can add more tension tying an additional knot further up
on the recoil rope (the thinner of the two cords along the bottom of the VR1). To
do this: stand the rower up, disconnect the cords, tie the knot on the recoil rope
(closest to the side that attaches to the pulley), and reattach the cords.
5. The monitor runs on two AA batteries. To replace monitor batteries, remove
monitor face by unscrewing the two screws on the top and bottom of the
computer.
6. Do not let go of handle while rowing as it could damage monitor screen.
For more information or to contact us, please visit:
www.puredesignfitness.com
BASIC MAINTENANCE
SAFETY
We recommend consulting a physician before starting out with an exercise program.
Please read all instructions before using the VR1.
WARNING:
Please keep hands away from moving parts when rowing machine is in use.
Keep all observers, especially children and pets, away from moving seat wheels, straps
and pulleys.
Place the handle back into the handle rest after use. Do not let go of the handle while
rowing.
When the VR1 is in its upright storage position, take care it is not bumped as this may
cause it to fall over. Take extra caution with children.
Do not pull on the handle when the VR1 is upright. This can cause the VR1 to fall over.