Li-LV LFP Battery Module | USER MANUAL
flame
Warning: Puredrive PSII-DC battery contains components, such as switches and relays,
that can produce arcs or sparks.
Warning: To protect Puredrive PSII-DC battery and its components from damage
when transporting, handle with care. Do not impact, pull, drag, or step on
PuredrivePSII-DC battery. Do not subject Puredrive PSII-DC battery to any strong
force. To help prevent damage, leave Puredrive PSII-DC battery in its shipping
packaging until it is ready to be installed.
Warning: Do not insert foreign objects into any part of Puredrive PSII-DC battery.
Warning: Do not expose Puredrive PSII-DC battery or its components to direct
Warning: Do not install Puredrive PSII-DC battery near heating equipment.
Warning: Do not immerse Puredrive PSII-DC battery or its components in water or
other fluids.
Caution: Do not use cleaning solvents to clean Puredrive PSII-DC battery or expose
Puredrive PSII-DC battery to flammable or harsh chemicals or vapours.
Caution: Do not use fluids, parts, or accessories other than those specified in this
manual, including use of non-genuine Puredrive PSII-DC parts or accessories, or
parts or accessories
not purchased
directly from Puredrive or a Puredrive certified
party.
Caution: Do not place Puredrive PSII-DC battery in a storage condition for more
than one (1) month, or permit the electrical feed on the Puredrive PSII-DC battery
to be severed for more than one (1) month, without placing Puredrive PSII-DC
battery into a storage condition in accordance with Puredrive’s storage
specifications.
Caution: Do not paint any part of Puredrive PSII-DC, including any internal or
external components such as the exterior shell or casing.
Caution: Do not connect Puredrive PSII-DC battery directly to photovoltaic (PV) solar
wiring.
Caution: When installing Puredrive PSII-DC battery in a garage or near vehicles, keep it
out of the driving path. If possible, install the Puredrive PSII-DC battery on a side wall
and/or above the height of vehicle bumpers.
ENVIRONMENTAL
CONDITIONS
Warning: Install Puredrive PSII-DC battery at a height that prevents damage from
flooding.
Warning: Operating or storing Puredrive PSII-DC battery in temperatures outside its
specified
range might
cause
damage
to
the battery.
Warning: Do not expose the Puredrive PSII-DC battery to ambient temperatures
above 60°C (140°F) or below -30°C (-22°F).
Caution: Ensure that no water sources are above or near the Puredrive PSII-DC battery,
including downspouts, sprinklers, or faucets.
To Next Page