19
CLEANING & MAINTENANCE OF PUREIT EXCELLA
14
16
Clean the Cleansing Collection Chamber with clean
water and leave to drip dry.
You may observe some amount of water coming back through the below pump which
can be pushed into the Carbon Polisher again. Please clean the Carbon Polisher with the
bellow pump multiple times for best results.
15
Close the mouth of the carbon block with one hand
and squeeze the bellow pump with the other hand
to force the water through the carbon block. You
can see dirt coming out of the carbon block.
Repeat procedure 5-6 times.
Fill Pureit water in the bellow pump.
13
Insert the bellow pump into the nozzle at the
bottom of the Carbon Polisher, the area opposite to side
with handles given.
To Next Page
Loading...
