Pureit EXCELLA - Page 22

20
While cleaning the Microcharged Membrane, please ensure your hands are germ free.
CLEANING & MAINTENANCE OF PUREIT EXCELLA
18
20
In case your water quality is very bad and the ow rate does not improve on cleansing the Microber Mesh and the
Carbon Polisher you need to clean the Microcharged Membrane as shown in point 20 and 21.
Fill Pureit water in the bellow pump. Insert the bellow
pump into the nozzle provided at the bottom of the
Microcharged Membrane Assembly.
Wash the Transparent Chamber with clean Pureit water
and ‘drip dry’.
19
Replace the Microber Mesh assembly in the
Cleansing Collection Chamber by turning it clockwise.
Ensure tightness.
17
Replace the Carbon Polisher in the
Microber Mesh assembly by turning
it clockwise. Ensure tightness.