4 Installation & Operation Manual Copyright © Puretec Pty Ltd 2020
For correct operation & installation it is essential to observe these instructions.
JUN2018
ATS5200.103
Licence No. WM 74593
Australian Certication
Services
User Guide
Filtration & Ultraviolet All in One Unit with Weather Cover
Hybrid-G
UV LAMP SPANNER USER GUIDESURGE
PROTECTOR
Preparing the system
Preparing Your System
Puretec systems are designed to run economically for many years, dependent on the
initial installation and periodical maintenance.
Please read all instructions carefully as failures caused by incorrect installation or
operation are not covered by warranty.
On removing your Hybrid system from its carton you should check all the components
(especially the lamp), to ensure all are present and have not been damaged in
transportation. Depending on your model, you should have:
Remove all the packing materials prior to use.
As a responsible manufacturer we care about the environment. We urge you to follow
the correct disposal procedure for your product and packaging materials. You must
dispose of this product and its packaging according to local laws and regulations.
Hybrid R models will also include a
separately packaged:
1. Hybrid Filter System (with double or
triple ltration and with or without
cover)
2. UV Lamp (in cardboard tube)
3. Bag containing Spanner, User Guide,
Spring and Surge Protector
4. Ballast (Hybrid G Models come with
Ballast pre-installed)
POWER CORD
BALLAST
HYBRID FILTER SYSTEM
SPRING
BALLAST FASTENERS
To Next Page
Loading...
