EasyManua.ls Logo

Purivox Carousel Triplex V - Assembly Instruction: Initial Steps; Tools, Gas Bottle, and Cross Bar Attachment

Purivox Carousel Triplex V
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Required tools:
Spanner (size 10) or
socket wrench (size 10)
and
Pliers
A standard propane gas bottle
is required for normal operation.
(Not included in delivery)
Notice:
Propane gas bottle can look similar to
the one which is shown in the manual.
Assembly instruction
Purivox Carousel Triplex V
11
Once the electronic unit is set.
Close the lid of the electronic
unit and turn the electronic unit
over.
Now remove the wing nut, tooth
washer and washer.
Take the cross bar (102090)
and put on end with the hole on
the screw.
Once that is done put the
washer, toothed washer on the
screw and tighten it firmly with
the wing nut.
Use the pliers.

Related product manuals