PXN CB1 - Page 3

• RGB Light Power Switch
Toggle the RGB light power switch on the back of the CBI
az܀
ON/OFF
to turn the RGB lights on or off
• RGB Light Color Switching
Hold the HANDLE button and rotate the
ABS knob to cycle through 7 RGB light
colors.
• RGB Light Brightness Adjustment
Hold the HANDLE button and rotate the
TC knob. Rotate clockwise to increase
brightness, counterclockwise to decrease
brightness.
• Mapping Button On/ Off
The ESC/ ENTER buttons are mapped to
the ESC/ ENTER keys on the keyboard by
default.
Hold the HANDLE button and press the
ESC/ ENTER button to disable mapping.
Repeat the operation to enable it.
• Accessory Installation
xoxox
CRU e
CAU t
n A-GI' ALO
IJse the M5 hex screws to attach the clamp to the CBI.
Step 1
Place the CBI on the table and tighten the clamp.
step 2
05 - English