www.PyleUSA.com
4
4. Short press PREVIOUS or NEXT button to switch the stored FM channels.
5. Short press EQ button to switch between SITE and BASS.
AUX-IN:
• Use the supplied audio cable to connect “LINE OUT”of the music players like
Phones/MP3/MP4 to the “AUX IN” of this speaker;
• Press the “MODE” button to switch to AUX IN state;
• Short press “PLAY/PAUSE” button to mute, short press again to relieve;
• Short press “EQ” to choose dierent style you like such as BASS or SITE;
When using an external device, all functions can be controlled by the external
device.
Microphone Input:
This product has one Microphone input. Just plug the 6.5MM microphone jack
then you can use.
TWS Function:
1. Turn ON two identical speakers you want to pair, please note that they must
have the same BT paring name, both under BT mode.
2. Only need to set up one of the two units before paring with your device.
3. Then press and hold “PLAY/PAUSE” button for around 4 seconds till show “BU”
on the digital display and the unit will make “di” voice once successfully paired
4. Then connect your Wireless BT with your phone to play music, one is in left
channel while the rest in right channel.
Remark:
1. Press the MODE button to switch for dierent modes, the order is Wireless BT,
USB disk, FM radio and AUX-IN.
2. Turn the power button to “OFF” if not in use.
To Next Page
Loading...
Need help?
General
