www.PyleUSA.com
FM Radio:
1. Under FM radio state, the audio cable provided treat as antenna.
Please insert the audio cable to get the best FM signal before using.
2. Turn the power button to “ON”, press the “MODE” button to switch to FM
radio state.
3. Under playing mode, short press “Play/Pause” button to auto search the
FM Channel and store it automatically.
4. Press Previous or NEXT button to change the stored FM channel.
AUX-IN:
For other compatible music devices or your MP3/MP4 players, use the
supplied audio line cable to connect from the device’s “Line Out” to the
“Aux In” of this devices. Then press the “MODE” button to switch to AUX-IN
state. Enjoy…
When using an external device, all functions will be controlled by the
external devise except the “Play/Pause” button.
Remarks:
1. Press the MODE button to switch dierent modes, the order is Bluetooth,
USB disk, Micro SD card, FM radio and AUX-IN.
2. Turn the power button to “O” to cut o the power supply when not in
use.
How to charge:
1. Power o the unit, put the provided charger cable into the charge slot of
the unit, connect the other end to a PC or in a charger with DC5V output
(not included), the red light charging indicator will be lit.
2. Charging time should be 3-5 hours. When charging is full, the indicator
light will switch o.
3. In order to prolong the life of battery, please do not charge more than 8
hours.
3
To Next Page
Loading...
Need help?
General
