REMOTE CONTROL
Remote control gives you commanding access only to USB/SD, Wireless BT and FM
functions and not the Master volume, microphone, bass, treble and other functions.
A. Please take out the battery sheet before using the remote control, otherwise the
remote control will not work.
B. Press these two buttons to select the previous or next track in USB/SD or
Wireless BT mode, there is no response in the FM mode.
C. Press this two buttons to select previous or next channel in FM mode,
there is no response in the USB/SD and BT mode.
D. Press these two buttons to increase or decrease Wireless BT volume, USB/SD
and FM. This buttons doesn’t control the master volume.
E. Press this button to auto scan all frequencies from 87.5MHz to 108MHz, the
unit will auto store the channels in FM mode. Please see 4, C for other details.
F. Press this button to select one from play mode (USB/SD mode, FM mode and
Wireless BT mode). Turning ON the unit will set the USB/SD mode automatically.
MP3 les will be played automatically after inserting USB ash drive or SD card.
You cannot select the AUX, CD and DVD input with this button.
G. Press and hold this button for 5 seconds to turn ON or OFF the USB/SD,
Wireless BT and FM mode but not to power ON/OFF the unit. The unit will output
the signal in CD, DVD, AUX input mode if you turn OFF the USB/SD, Wireless BT
and FM.
H. Aim the remote controller at the receiver of the main unit.
1. Press this button to chose the ID3 display model, will show TITLE/ARTIST/ALBUM/OFF.
Hold this button for 5 second to turn ON or OFF the MP3.
2. When in the FM mode, press this two buttons to tune FM Frequency.
3. Press these two buttons to select the previous or next track in USB or SD or
Bluetooth mode, to select previous or next channel in FM mode.
4. Volume up or down
5. Press the numbers to select the tracks directly.
The unit takes 1-2 seconds to response in USB or SD mode.
6. Press this button to repeat mode.
ww w.PyleUSA.com
5
7. Press this button to select the playing mode, such as USB/SD/FM/WIRELESS BT
8. EQ function: Select a pre-set mode of the equalizer that is designed accordingly.
9. Play and Pause function for MP3 in USB/SD/BT model. Press this button to auto
scan the channel in FM model, and auto store channel.
USB PORT
The USB port is only used for playing audio les on your USB ash drive.
DO NOT use it for power supply as it may damage the unit.
NOTE:
The USB input is ONLY meant to connect to a USB dash drive (thumb drive).
Connecting a MP3 player or computer directly to the USB ash drive input will result
the unit failing to play audio from those devices.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
