10.PowerConnection
The PDA35BT operates on 24VDC and MUST be used with a power supply that can provide at least 5A. A world
compatible(100V‐240V)switchmodepowersupplyisincludedwiththeunitandissuppliedwithaU.S.Astylecord.To
operateinother
countriesanappropriatepowercordwillneedtobepurchased.Thepowerconnectionontheunitisa
2. 5mm x 5. 5mm jack with center pin being positive. Note: if an inappropriate power supply is used and the unit is
damaged,thewarrantywillbevoided.Ensurethatthe
amplifierispowereddown.Locatethebananaplugsandremove
theprotectiverubberboots.Loosenthesetscrewsusingasmallstraightbladescrew
ConnectingyourloudspeakerstothePDA35BT:
Remove approximately 1/ 2'' of the insulation from your speaker wire positive and negative conductors. Slide the
appropriatecolored(red
forpositive,blackfornegative)rubberbootoverthespeakerwire.Inserttheconductorsinto
thebananaplugsandtightenthesetscrewsandslideprotectiverubberbootsbackintoplace.Whileobservingproper
polarityinsertbananaplugsintothespeakeroutputreceptaclesonthebackofthePDA35BT.
BLUETOOTH
OPERATIONINSTRUCTION:
Externaldeviceswhich haveabuilt‐ in Bluetooth feature canbeconnected tothisamplifier wirelessly to play through
theamplifier’sspeakers.
1.Atfirstbesurethattheamplifierispoweredon,andturnthevolumetotheLOWposition.Andit’sbettertopullthe
BluetoothAntennaon
atthebackpanelforbetterreceiving.
2.PresstheBT/Linebuttonswitchinonthefrontpanel,youwillhearthevoice“POWERON”andalso“PAIRING”,and
thentheunitisautomaticallyreadytopairwithyourexternal device.
3.TurnontheBluetoothofyourexternaldeviceslike
Smartphone,Computer,andothers,etc.
4.Search for available Bluetoothdevices within range of your external device and wait for your device to select “BT‐
RY”onthepairingdeviceslists.
5.Andsecondslaterwhenyouheardavoice“YourDeviceisConnected”,then theBluetoothpairingissuccess.
6.You
cannowplaymusiconyourexternaldevicethroughtheamplifier.
To Next Page
Loading...
