Pyle PDICBT57 User Manual

Pencil
Measuring tape
Carpenter’s level
Phillips #2 screwdriver
Utility knife
Awl
6
INSTALLATION
TOOLS NEEDED
The in-wall/in-ceiling speakers were designed to be easily installed.
However,if you are unsure of your ability to properly install these loud
speakers please contact your dealer or a qualied installer.
1. Cut the drywall
Note: Always allow at least one-half inch between a wall stud and the
speaker cutout or the locking tabs will not be able to swivel into place.
2. Connect the speaker wires to the speaker

Pyle PDICBT57 Specifications

General

Brand	Pyle
Model	PDICBT57
Category	Speaker System
Language	English