To Next PageTo Next PageHow to fix a Pyle PDWM2120 with a transmitter display that is not lit?
If the Pyle Microphone system's transmitter display isn't lit, turn on the transmitter, ensure the battery's +/- pole is correctly oriented, and replace the battery.
What to do if the Pyle Microphone system receiver RF LED indicator is lit but there is no sound?
If the receiver RF LED indicator is lit on your Pyle Microphone system but you have no sound, adjust the receiver's volume and check the cable connection between the receiver and the amplifier/mixer.
Why does my Pyle PDWM2120 Microphone system have distortion or squeal?
If you are experiencing distortion or squealing with your Pyle Microphone system and the Receiver RF indicator is ON, try the following: * Remove any nearby interference sources such as CD players, PCs, digital devices, or in-ear monitor systems. * Change the frequency of the transmitter. * Replace the battery. * If using several systems simultaneously, increase the frequency space.
What does it mean when the BATT icon is flashing on my Pyle Microphone system?
If the BATT icon is flashing on your Pyle Microphone system, replace the battery.
What to do if the Pyle Microphone system receiver RF indicator is not lit but the transmitter display is lit?
If the receiver RF indicator is not lit, but the transmitter display is lit on your Pyle Microphone system, remove any nearby metal items from the receiver, check for barriers between the transmitter and receiver, and ensure the transmitter is close to the receiver.
General| Frequency Response | 50Hz-15kHz |
|---|---|
| Number of Channels | 2 |
| Microphone Type | Handheld |
| Frequency Stability | ±0.005% |
| Modulation Mode | FM |
| Maximum Deviation | ±15kHz |
| T.H.D. | <0.5% |
| Transmitter Power | 30mW |
| Outputs | 1/4'' unbalanced |
| System Type | Dual Channel VHF Wireless Microphone System |
| Battery Life | Up to 8 hours |
