Pyle PLCD5MRBTS User Manual

5
INSTALLATION
4. Lift the top of the outer trim ring then pull
it out to remove it.
5. Insert both of the supplied keys into the
slots at the middle left and right sides of
the unit, then pull the unit out of the
dashboard.
DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan, Toyota, follow
these mounting instructions.
Use the screw holes marked T (Toyota), N
(Nissan) located on both sides of the unit to
fasten the unit to the factory radio mounting
brackets supplied with your vehicle.
Dashboard or Console
Screw
Factory Radio
Mounting Bracket
Side View showing
Screw Holes marked
T, N
Screw
To fasten the unit to the factory radio
mounting brackets.
Align the screw holes on the bracket with
the screw holes on the unit, and then
tighten the screws (5x5mm) on each side.
Note: the outer trim ring, sleeve and the
metal strap are not used for method B
installation.

Pyle PLCD5MRBTS Specifications

General

MP3 playback	Yes
DVD Audio playback	No
Audio formats supported	MP3, WMA
AM band range	520 - 1710 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM, PLL
Preset stations quantity	30
Display type	LCD
USB version	2.0
Bluetooth version	2.0+EDR
USB ports quantity	1
Headphone connectivity	3.5mm
Output power	240 W
Product color	Silver
Volume control	Rotary
Disc types supported	CD, CD-R, CD-RW
Compatible memory cards	MMC, SD
Key illumination color	Blue

Weight and Dimensions

Depth	107 mm
Width	178 mm
Height	50 mm