Pyle PLD7MU Instructions

INSTRUCTIONS
RADIO OPERATION (Please look at picture #6)
1. Band Selection
In radio mode, press BAND button, BAND/P/N button on remote control, or touch
position on screen every time to choose band, the sequence is as follows:
рүп Ро — ne
AMD — AMT
2. Adjust Frequency:
Manually Adjust Frequency:
Press SEEK + button on remote control, or » touch button on display shortly every time,
frequency will increase one step by one step till you get desired frequency. Press SEEK -
button on remote control, or W4 touch button on display shortly every time, frequency
will decrease on step by step till you get desired frequency.
Search Station:
Press SEEK + / SEEK - button on remote control, or ЭМ/ ВМ touch button on display
shortly every time to search station in up/down direction. When get one station, it will
auto stop searching.
3. Browse / Auto Search and Store Station
1) In radio mode, press AMS/RPT button on remote control, or APS button on display
shortly to browse preset station on 1-6;
2) In radio mode, press AMS/RPT button on remote control, or APS button on display
longer to auto search in whole band from present frequency and store 6 most strong,
frequency on 1-6;
3) This unit has FMI, ЕМ2, FM3, AMI, AM2 Bands. Each band can store 6 stations,
so a total 30 preset stations.
Note: After preset station, unit will cancel the former preset stations.
4. Mono/Stereo Selection
In radio mode, press ST/PTOG button on remote control or ST touch position on display
to choose mono/stereo program.
Note: In radio mode, start up the stereo function automatic, touch the ST button again on
the display, the TFT display will show the ST OFF & МОМО mark, that is to turn off the
stereo. When the right under foot appear the MONO mark, it show the MONO on.
5. Manual Preset and Store Station
In radio mode, press 1-6 button on remote control, ог 1-6 position on display longer to
store preset frequency into preset channel. For example, the present frequency is
89,8MELz, press 2 button longer, then 89 8МНг frequency is stored in 2 channel.

Pyle PLD7MU Specifications

General

Brand	Pyle
Model	PLD7MU
Category	Car Video System
Language	English