Pyle PLD7MU Instructions

INSTRUCTIONS
BASIC OPERATION
1. SOURCE ON/OFF
Press SRC button on panel or PWR button оп remote control quickly to power оп,
Press SRC button on panel or PWR button on remote control longer to power off.
2. PLAYING SOURCE CHOOSE
Press SOURCE button on remote control, unit will switch sources in the following
sequence: RADIO -» DVD ~e» AUX
3. MUTE CONTROL,
Press MUTE button on panel or MUTE button on remote control shortly to turn off
sound output, press again to back to sound output.
4. VOLUME ADJUSTMENT
1) Press VOL+/VOL- button on panel, VOL*/VOL- button on remote control or touch
button on display to adjust volume level.
2) The volume setting on this unit is 0- 39.
TONE MODE ADJUSTING (SEL)
Press SEL button on remote control or SEL button on the panel to choose your desired
tune mode: VOL - BAS -+ TRE — L/R — F/R
NOTE:
1) DVD playing mode, MBP & User will be automatically activated.
2) After 5 seconds you choose desired mode, do not adjust volume button. The mode
will automatically take you back to status before adjustment.
5. RESET
1) If unit is not working correctly, you should press the RES button. This will reset the.
radio and should start working correctly afterwards.
2) After reset, ай settings will resume back to the factory default settings.

Pyle PLD7MU Specifications

General

Brand	Pyle
Model	PLD7MU
Category	Car Video System
Language	English