Pyle PLD7MU - Page 35

INSTRUCTIONS
$.08D.
In playing mode, short press OSD on remote control to show all information of present
disc.
9. Number Buttons
In VCD mode, press 0-9 number button to input song. For example, you want to choose.
13th song, press 10+ button, and then press3 button once to play 13th song.
Note: This function can only be worked by the remote control.
10. Repeat Play
In playing mode, press AMS/RPT button on remote control, to startup following, repeat
function. Single song repeat- Repeat play off.
Note:
1) When playing VCD disc, if PBC is on, no repeat function.
2) After unit is power off or mode is switched to other playing mode except VCD mode.
if you switch back to VCD mode, repeat playing will be cancelled.
11. Randomly Play
In
VCD
mode,
press
LOC/RDM
button
on
remote
control,
to
instantly
play
each
song.
Press
again
to back
to the normal
play.
Note: When VCD disc, if PBC is on, RDM will not work.
12. Switch Track
In VCD mode, press AUDIO button on remote control to switch track as following,
lence:
id Right — Stereo
13. OPEN
Press OPEN button on panel to eject disc.
14. PBC (MENU) Play
In VCD mode, press this button then play the PBC and display will show whole menu
in disc, work with number button to choose song. When you are playing either song,
of the PBC, and you want to stop to select another song, press the button to turn off.
Note:
1) This function can be worked by the control
2) PBC is suitable for the SVCD and VCD 2.0 disc.
3) In PBC mode, you can not press number button only to choose song,