www.PyleUSA.com
SETTINGS
1. Scrolling
Use the red bar to scroll through the list of all available options.
2. Turn on/o
Many settings can be toggled on or o in this screen
*Note: Factory setup is not adjustable by user. Do not attempt to enter this setup menu.
SET TIME
1. Time Options
You can select using GPS to provide positioning time or using net work-provided time.
2. Date and Time
Use the up and down arrows to set the date and time accordingly.
3. Select time zone accordingly.
SOUND
1. Fade/ Balance
Hold and drag left, right up or down to control the fade and balance of your audio output.
AUX
Auxiliary input (rear RCA jacks) allow audio and video from external devices to be displayed or played through the
unit. Auxiliary output (rear RCA jacks) allow audio and video to be sent out to external devices.
1. Customization – Use the settings to adjust and optimize the display quality.
Note: Auxiliary app will display “No Signal” if no video signal is connected. Screen controls will not become active
until external video signal is detected.
*The Parking brake will need to be wired to a grounding trigger to allow video pass through or a warning message
will appear saying warning video disabled while driving.
7
To Next Page
Loading...
