Pyle PLDVRCAM44 User Manual

www.PyleUSA.com
4
down after 5 seconds. Recorded les will be saved on the
micro SD card.
2. Manual Recording Function
Long press recorder “OK” conrmation button for 3
seconds, the camera will power on and start recording
automatically.
3. Photo Taking Mode.
In standby, short press Mode to enter photo taking mode,
Use OK button to take a photo, and UP and Down button
to zoom in and out.
4. Playback Mode
In standby, short press Mode twice to enter playback, use
UP/down to select ,and OK to play, short press mode to exit
playing, and use Menu button to delete the selected le.
5. Loop Recording / Cyclic Record
Turn on the loop recording function, and the camera will
record in seamless 1/2/3 minutes clips,
Attention
A. If you turn o loop recording, the camera will stop
recording if the memory card is full.
B. In loop recording, when memory card is full, the camera
will overwrite the earliest recording les and starts a new
one.
6. Use the motion detection function
In standby mode, Long press “MENU” button to enter into
the motion detection mode. The moving objects can be
detected and recorded automatically by the car DVR when
the motion detect function is on. If there is no moving

Pyle PLDVRCAM44 Specifications

General

Brand	Pyle
Model	PLDVRCAM44
Category	Dash Cameras
Language	English