www.PyleUSA.com
6
10. Playback
Short press “MODE” button in standby mode, you can
enter into the playback mode. Short press “ up/down”
button to nd le playback. Short press “OK” to play. If you
need to exit playback mode, short press “MODE” button
again.
11. View Reverse Video
The camera must be powered by the car charger,
connect the red wire on the rear camera to the reversing
light cable positive electrode. If you turn to reverse gear,
the camera will automatically display the rear camera
image in full screen to assist reversing, and resume
normal recording afterward.
12. Parking Monitor
The parking monitor is used to monitor your car after
parking. When you turn on parking monitor, after the
engine stops and the camera powers o, the camera is in
standby, if the car has suered a shock or vibration, the
camera will automatically turn on and start recording for
30 seconds then return to standby.
To Next Page
Loading...
Need help?
General
