Need help?Do you have a question about the Pyle PLMRA200 and is the answer not in the manual?
General| Power Output | 200 Watts |
|---|---|
| Channels | 2 |
| Frequency Response | 20Hz - 20kHz |
| Signal to Noise Ratio | > 95 dB |
| THD | < 0.1% |
| Weight | 5.5 lbs |
| Impedance | 4-8 Ohms |
| Input Sensitivity | 200mV |
Explains the gain control for matching input signal levels to prevent noise and damage.
Explains advanced protection circuits that disable the amp due to overloads or shorts.
Instructions for connecting speakers in stereo and mono bridged modes, including impedance.
Guides for connecting the +12V DC power supply, ground, and remote turn-on wire.
Key technical details including output power, frequency response, impedance, and dimensions.
To Next Page
