Pyle PLMRA620 User Manual (English)

To Next Page

All Pyle products are carefully constructed and thoroughly tested before

shipment. Products purchased in the USA are warranted to be free of defects

in material and workmanship for two (2) years from the date of purchase. This

warranty is limited to the original retail purchase.

Should the product fail due to factory defects in material or workmanship,

your unit will be repaired or replaced at the sole discretion of Pyle.

To obtain warranty service you must first call our Consumer Return Hotline

number at (718) 236-6948 to obtain a Return Authorization number. This

R.A.# must appear on the outside of your package and on all paperwork

relating to your return.

When returning a product to us for warranty service it must be carefully packed

and shipped prepaid to:

You must also include the following items:

• A copy of your sales receipt or other proof of purchase

• A brief letter indicating the problem you are experiencing

• include in your letter your return address, daytime phone number,

and R.A. number

• also include a check or money order for $18.00 for return shipping,

handling, and insurance, or provide your Visa/MC number with

expiration date.

R.A.#

Pyle Service Center

1600 63rd Street

Brooklyn, NY 11204

Our obligation under this warranty is limited to the repair or

replacement of the defective unit when it is returned to us prepaid.

This warranty will be considered void if the unit was tampered with,

improperly serviced, or subject to misuse, neglect, or accidental

damage.

limited warranty policy

www.pyleaudio.com

amplifiers

Other manuals for Pyle PLMRA620

Need help?

Do you have a question about the Pyle PLMRA620 and is the answer not in the manual?

General

Bass boost	0 - 18 dB
Amplifier class	D
Frequency range	15 - 30000 Hz
RMS rated power	2000 W
Input sensitivity	250 mV
Built-in crossover	Yes
Audio input channels	5.1 channels
Peak power per channel	500 W
Signal-to-Noise Ratio (SNR)	95 dB
Total Harmonic Distortion (THD)	0.04 %
RMS power output per channel (2 Ohm)	400 W
RMS power output per channel (4 Ohm)	250 W
Bridge-mode power output per channel (4 Ohm)	900 W
XLR in	No
Audio (L/R) in	3
Speaker selector	A+B
USB 2.0 ports quantity	0
Speakers connectivity type	Clamp terminals
Purpose	Car
Material	Aluminum
Cooling type	Active
Product color	Blue, Silver
Volume control	Digital
Connectivity technology	Wired
Maximum current	60 A
DC input voltage	12 V
Power protection features	Overheating, Overload, Short circuit
LED indicators	Power, Status