Need help?Do you have a question about the Pyle PLMRA620 and is the answer not in the manual?
General| Bass boost | 0 - 18 dB |
|---|---|
| Amplifier class | D |
| Frequency range | 15 - 30000 Hz |
| RMS rated power | 2000 W |
| Input sensitivity | 250 mV |
| Built-in crossover | Yes |
| Audio input channels | 5.1 channels |
| Peak power per channel | 500 W |
| Signal-to-Noise Ratio (SNR) | 95 dB |
| Total Harmonic Distortion (THD) | 0.04 % |
| RMS power output per channel (2 Ohm) | 400 W |
| RMS power output per channel (4 Ohm) | 250 W |
| Bridge-mode power output per channel (4 Ohm) | 900 W |
| XLR in | No |
| Audio (L/R) in | 3 |
| Speaker selector | A+B |
| USB 2.0 ports quantity | 0 |
| Speakers connectivity type | Clamp terminals |
| Purpose | Car |
| Material | Aluminum |
| Cooling type | Active |
| Product color | Blue, Silver |
| Volume control | Digital |
| Connectivity technology | Wired |
| Maximum current | 60 A |
| DC input voltage | 12 V |
| Power protection features | Overheating, Overload, Short circuit |
| LED indicators | Power, Status |
Weight and Dimensions| Depth | 498 mm |
|---|---|
| Width | 276 mm |
| Height | 69.5 mm |
To Next Page
