Pyle PLMRA620 Manual

congratulations...
on your purchase of a Pyle
Marine Series amplifier. This amplifier
extends the Pyle tradition into a totally new series of amps, designed
from the ground up to deliver the power, performance and flexibility
the modern car audio enthusiast demands.
When you check the list of features offered by the PLMRA620
you’ll know you made the right choice with a Pyle Marine amplifier.

Pyle PLMRA620 Specifications

General

Bass boost	0 - 18 dB
Amplifier class	D
Frequency range	15 - 30000 Hz
RMS rated power	2000 W
Input sensitivity	250 mV
Built-in crossover	Yes
Audio input channels	5.1 channels
Peak power per channel	500 W
Signal-to-Noise Ratio (SNR)	95 dB
Total Harmonic Distortion (THD)	0.04 %
RMS power output per channel (2 Ohm)	400 W
RMS power output per channel (4 Ohm)	250 W
Bridge-mode power output per channel (4 Ohm)	900 W
XLR in	No
Audio (L/R) in	3
Speaker selector	A+B
USB 2.0 ports quantity	0
Speakers connectivity type	Clamp terminals
Purpose	Car
Material	Aluminum
Cooling type	Active
Product color	Blue, Silver
Volume control	Digital
Connectivity technology	Wired
Maximum current	60 A
DC input voltage	12 V
Power protection features	Overheating, Overload, Short circuit
LED indicators	Power, Status

Weight and Dimensions

Depth	498 mm
Width	276 mm
Height	69.5 mm