Attention:
To avoid possible malfunction, damage to the product, data loss, or harm to
other property, please follow these guidelines:
OPERATION
• Do not use the device near TVs, radios, stereo equipment, mobile phones, or
other electronic devices to prevent noise interference.
• Avoid exposing the device to excessive dust, vibrations, extreme cold, heat, or
direct sunlight.
• Do not place vinyl, plastic, or rubber objects on the device, as they may discolor
the panel.
• Clean the device with a dry, soft cloth. Avoid using paint thinners, solvents, or
chemical-impregnated cloths.
• Allow the device to acclimate if condensation occurs due to temperature changes.
Wait several hours before turning it on.
• Avoid setting all controls to their maximum levels, as this may cause feedback
and damage connected speakers.
• When powering on your audio system, always turn on the power amplier last to
avoid speaker damage. Power o the amplier rst when turning o the system.
Precautions for USB 2.0 and 5V DC Terminals:
• Use an AB-type USB cable (USB 3.0 cables are not supported).
• Disable any power-saving modes (e.g., suspend, sleep, or standby) on your
computer before connecting to the USB 2.0 terminal.
• If the computer or device crashes, restart the software or operating system, or
disconnect and reconnect the unit.
CONNECTION DIAGRAM
For MIC & LINE inputs
ww w.PyleUSA.com4 ww w.PyleUSA.com 5
*Keep the buttons bounce
up, for STEREO inputs.
*Press down the buttons,
for MONO inputs.
Syntesizer
Dynamic
Microphone
Condenser
Microphone
Guitar
Headphones
External Audio
L
R
Stereo
Transfer
and
Record
Power Supply:DC 5V,1A
Power Socket
Power Bank
PC USB Power Supply
Speakers
CD Player
Speakers
To Next Page
Loading...
