Pyle PMUX9 - Controls and Functions

CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS
1. [MIC/LINE] Input jack: Connect a microphone or musical instrument.
Supports both XLR and unbalanced 1/4" plugs.
2. [GUITAR] Input jack: Connect an instrument such as an electric guitar or bass.
3. [AUX IN] 3.5mm auxiliary input jack: Provides exible connectivity for various
external devices. AUX IN volume is controlled by external devices or the
MONITOR knob. The input signal from AUX IN can be recorded to a PC only when
the [PC REC] switch is in the up position during MIC+PC recording.
Recording volume is controlled externally without MONITOR knob control.
4. [RCA IN] Stereo input jack: Connect a TAPE or CD player.
5. [PHONES] Output jack: Two headphone jack options (6.35mm and 3.5mm) for
stereo phones.
6. [STEREO OUT] 3.5mm auxiliary output jack.
7. [MONITOR OUT] Output jack: Connect to an active speaker or amplier.
8. [USB 2.0] Terminal: For data transfer, recording, and power supply.
When connected to a computer, it powers the mixer, and audio data is exchanged
between the mixer and computer. Supports stereo playback and recording with
a 24-Bit/48kHz sampling rate. If using a power socket or power bank, ensure the
output voltage is 4.8V to 5.2V and the output current is at least 1A.
9. [GUITAR] Controller: Controls the input level of the guitar channel, adjusting to
balance the volume.
10. [RCA/AUX] Controller: Controls the input level of RCA and AUX inputs,
adjusting to balance the volume.
11. [SIG] Signal Indicator: Brightness changes with signal input intensity.
12. [INPUT 1-2 L-R] Controller: Controls the input level of MIC/LINE channels,
adjusting to balance the volume.
13. [PEAK] LED: Lights up when the input signal is too high. If it ashes consistently,
rotate the [INPUT] Controller counterclockwise to lower the volume.
14. [PAD] Button: Attenuates the sound input. Turn this on if you hear distortion
or if the [PEAK] LED indicator lights up.
ww w.PyleUSA.com6 ww w.PyleUSA.com 7
1 2 5 3
8 7 6 4