The volume of Bluetooth will turn down if press and holding the button for more than 3
seconds.
4.
NEXT BUTTON---- This button has six functions depending on these different modes as below.
(a) USB Play Mode---NEXT and FF
Use this button to select next track.
The unit will fast forward play if press and holding the button for more than 3 seconds.
(b) Bluetooth Mode----PREV and Volume down
Use this button to select previous track.
The volume of Bluetooth will turn up if press and holding the button for more than 3 seconds.
Additional Notes and Warnings
Remark: 1. The unit will auto play when USB is inserted into the device (include mp3 files) in
USB mode.
2. The unit will not auto play when connected to Bluetooth device in Bluetooth mode,
you will need to press play button.
Never connect line-level equipment to the highly sensitive PHONO inputs! The output
levels of PHONO cartridge systems are in the millivolt range, whereas CD and MD
players, as well as tape decks, provide outputs levels in the volt range. In other words,
the level of line signals is up to 100 times higher than PHONO output levels.
Do not turn up the volume when no turntable is connected to the PHONO input terminals.
Doing so will cause humming or noise. When not connecting a turntable, keeps the
“LINE” setting.
In order to avoid power-up thumps, which can damage your loudspeakers, please power
up your amplifier last. There should be no signal present, e.g. no music playing, when
you turn on your amp. In addition, we suggest that you set all volume-related controls to
“zero” (down) before powering up your system. Following these precautions will save
you from unpleasant and potentially dangerous surprises.
To Next Page
Loading...
Need help?
General
