Pyle pmx7bu User Manual

27. The HEADPHONES jack allows you to connect your headphones for pre-listening (PFL signal).
For best results, use headphones with an impedance rating of at least 32 Ohms
BUTTON CONTROLS AND FUNCTIONS
1. MODE BUTTON
This button lets you toggle a working mode, USB play mode, Bluetooth mode. This lets you choose
which music source device will play. The LEDS will verify which mode is activated.
MODE
LED1 LED2
USB play mode ON OFF
Bluetooth mode Sets search FLASH OFF
Connecting ON ON
2. PLAY BUTTON----This button has four functions depending on these different modes as below.
ాaి USB Play Mode---Play
Each press of the PLAY BUTTON causes the operation to change from play to pause or from
pause to play.
(b) Bluetooth mode----Play
Each press of the PLAY BUTTON causes the operation to change from play to pause or from
pause to play.
3.
PREV BUTTON---- This button has seven functions depending on these different modes as
below.
(a) USB Play Mode---PREV and FB
Use this button to select previous track.
The unit will fast backward play if press and holding the button for more than 3 seconds.
(b) Bluetooth Mode----PREV and Volume down
Use this button to select previous track.

Pyle pmx7bu Specifications

General

Brand	Pyle
Model	pmx7bu
Category	Music Mixer
Language	English