27. The MIC1 MIC2 INPUT connector is a balanced 1/4” TRS socket for microphone
connection.
BUTTON CONTROLS AND FUNCTIONS
A. MODE BUTTON: This button lets you toggle a working mode, USB play mode,
Wireless BT mode. This lets you choose which music source device will play.
B. PLAY BUTTON: This button has two functions depending on these dierent
modes as below.
a.USB Play Mode: Play
Each press of the PLAY BUTTON causes the operation to change from play to
pause or from pause to play.
b. Wireless BT mode: Play
Each press of the PLAY BUTTON causes the operation to change from play to
pause or from pause to play.
C. PREV BUTTON: This button has four functions depending on these dierent
modes as below.
a. USB Play Mode: PREV and Volume DOWN
Use this button to select previous track.
The volume of USB will turn down if press and holding the button for more
than 3 seconds.
b. Wireless BT mode: PREV and Volume DOWN
Use this button to select previous track. The BT volume will turn down by
pressing and holding the button for more than 3 seconds.
c. NEXT BUTTON: This button has four functions depending on these dierent
modes as below.
a. USB Play Mode: NEXT and FF
Use this button to select next track.
The volume of USB will increase
if press and holding the button for more than 3
seconds
b. Wireless BT mode: PREV and Volume UP
Use this button to select previous track.
The volume of BT will increase if press and holding the button for more than
3 seconds.
Remark:
1.The unit will auto play that Insert into USB device (include mp3 les) in USB mode.
2. The unit will auto into Bluetooth mode when the unit turn on without USB.
www.PyleUSA.com
6
To Next Page
Loading...
Need help?
General
