www.PyleUSA.com
13
USING THE MASTER VOLUME CONTROL
The MASTER volume control increases or decreases the output level gain. For best
performance with the least distortion, adjust the output level so that the LED
meter does not continually exceed the right extreme of the meter's range.
CAUTION: Setting the output level too high can overdrive the amplier and cause
permanent damage.
USING THE MIX BUS JACK
You can connect another PT110 or PT210 amplier to this jack to double the size
of your PA system. This allows you to use up to four microphones and two turntables
(or two auxiliary) sound sources. Use a shielded cable with phono plugs at each
end, and connect the cable between the MIX BUS jacks on the back of two
ampliers.
For best results, do not use a cable longer than 6 feet.
Mix Bus Jack