Need help?Do you have a question about the Pyle PT270AIU and is the answer not in the manual?
General| Receiver type | stereo |
|---|---|
| Frequency range | 40 - 15000 Hz |
| RMS rated power | 300 W |
| Input sensitivity | 400 mV |
| Audio output channels | 2.1 channels |
| Signal-to-Noise Ratio (SNR) | 76 dB |
| Total Harmonic Distortion (THD) | 1 % |
| Power output per channel (1KHz@8 Ohm) | 150 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| HDMI in | 0 |
| Line-in | Yes |
| Audio (L/R) in | 1 |
| Audio (L/R) out | 5 |
| Phono inputs (RCA) | 2 |
| Connectivity technology | Wired |
| Speakers connectivity type | Banana connector |
| Ethernet LAN | No |
| Supported radio bands | AM, FM |
| Preset stations quantity | 50 |
| Compatible memory cards | SD |
| Display | - |
| Product color | Black |
| Volume control | Rotary |
| Apple docking compatibility | iPhone |
| AC input voltage | 220 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Depth | 300 mm |
|---|---|
| Width | 483 mm |
| Height | 80 mm |
| Weight | 7200 g |
To Next Page
