What to do if my Pyle Stereo Receiver has no sound?
If your Pyle Stereo Receiver has no sound, there are several possible causes: * The speakers or components might be disconnected, so reconnect them. * The wrong component might be selected on the unit; select the correct one. * The volume control might be at its lowest level; increase the volume. * There may be a short or open in the speaker wire; check the speaker wire.
How to fix a Pyle Stereo Receiver with no power?
If your Pyle Stereo Receiver isn't powering on, it could be due to: * The AC power cord being disconnected. Ensure the AC power cord is securely connected. * A poor connection or inactive wall socket. Check the wall socket for proper connection and activity.
Why does one master speaker have no sound on my Pyle Stereo Receiver?
If one master speaker on your Pyle Stereo Receiver has no sound, consider the following: * There may be bad or incorrect speaker connections; check and correct the speaker connections. * The balance may not be centered; adjust the balance to the center. * A speaker wire may be shorted or open; check the speaker wire for these issues.
What to do if my Pyle PT390BTU has bad sound?
If your Pyle Stereo Receiver is producing bad sound, consider these potential issues: * The speakers may be in an unsuitable location; relocate them to a more appropriate place. * There might be bad or incorrect speaker connections; check and correct the connections. * The treble and bass controls may be too low; adjust them to a suitable level.
How to fix a Pyle Stereo Receiver microphone with no sound?
If the microphone connected to your Pyle Stereo Receiver has no sound, check these: * The microphone volume may be too low; increase the microphone volume. * The microphone may not be turned ON; turn the microphone ON. * The microphone wire may be shorted or open; check the microphone wire.
Why does my Pyle Stereo Receiver have severe hum or noise?
If you're experiencing severe hum or noise with your Pyle Stereo Receiver: * Ensure all speaker and component connections are secure. * Clean the plugs and jacks, as they may be dirty.
General| Frequency Response | 20Hz - 20kHz |
|---|---|
| Input Sensitivity | 200mV |
| Bluetooth | Yes |
| Bluetooth Version | 4.2 |
| FM Radio | Yes |
| Remote Control | Yes |
| USB Port | Yes |
| Equalizer | Yes |
| Display | LCD |
| Power Output | 1000W |
| RMS Power | 250 Watts |
| Signal to Noise Ratio | 80dB |
| Radio Support | FM |
| Bluetooth Range | 30 feet |
| Power Supply | 120V |
| Inputs | RCA, USB |
| Outputs | RCA |
Identifies the PT390BTU as a Digital Home Theater Wireless BT Stereo Receiver.
Provides contact details for questions, service, or comments.
Key safety warnings regarding electrical shock and exposure to elements.
Essential checks before powering on and operating the unit.
Recommendations for optimal placement and environmental conditions.
Describes how to power on, select inputs, adjust volume, and use microphone features.
Guide on replacing stored radio stations using the remote control.
Instructions for connecting and streaming audio via Bluetooth.
Details the buttons, knobs, and display located on the front of the receiver.
Outlines the various input and output ports available on the rear of the unit.
Explains the function of each button on the amplifier's remote control.
Provides solutions for common problems like no power, no sound, or hum.
Lists key system features including channel support, connectivity, and playback capabilities.
Details the functionality and device compatibility for Bluetooth streaming.
Lists all items provided in the product package.
Provides detailed technical data including power, impedance, and dimensions.
To Next Page
