www.PyleUSA.com
PTVSTNDPT3215
Portable Flat Panel Television & Monitor TV Mount Stand,
Height Adjustable (for TVs up to 32’’)
Tripod TV Stand
Before you start to assemble this with your device
please check the mounting holes, the size of the
monitor and the weight of the monitor is correct.
Normally for assembling this stand with your
TV/Monitor, it is better to have two persons as
some TV/ Monitor is heavy or big.
The stand itself has been already assembled so you
only need mount panel with the monitor or TV, so
when you open the box you will nd a complete
stand with some hardware for mounting the panel
to the TV or monitor
You can place down the stand and mount the panel
with the back of your TV/Monitor, you need to choose
the right bolts and right hole distance to match the
VESA holes of the TV/Monitor, then set up the tripod.
Expand the legs as wider as you can to be stable.
Adjust knob in the middle to the height you need.
Adjust the angle via the knob In the top to the better
view angle you need and tighten lt. Turn the monitor
left or right to your desired position.
When you move the stand, it is better hold the TV
rstly to be safe. You can also use it to mount other device.
To Next Page
Need help?
General
