Pyle PUCWM11 User Manual

TABLE 1.WASH MODE AND WASH/RINSE TIME
1. Pull out the power cord and hang it on the hook on the side of the washing
machine.
2. Thoroughly drain out the water from the wash tub.
3. Turn the Wash Selector to Normal position.
4. Clean the washing machine and hang the drain hose to the hook on the side of
the machine. 3.Uselowfoaming/high--densitylaundrypowderorliquid
detergent for more
effective washing.
4. Use of warm (not hot or boiling) may improve washing effect.
5. Remove the water supply inlet hose and remove the water from it and place
hose nside the wash tub.
6. Let the machine air dry in a ventilated place before putting back the Lid Cover.
 7.Whenthewashingmachinehasbeenusedforsometime,somefabricnaps
 mayaccumulateunderneaththepulsator.Ifthispiles-up,itmayaffectthe
 normalrunningoftheroll-stick.Tocheckandcleanthis,takeoutthepulsator
by unscrewing it carefully. Clean the pulsator by subjecting it by running water
and brushing it lightly. Do not use steel brush. Clean the base of the wash tub
also for any fabric naps. Return the pulsator to its proper position. It is
suggested that you clean it once a month.
MAINTENANCE AFTER USE
LEVEL OF SILK WOOL COTTON,HANG COTTON & HEMP
Soiled Mode Chemical Light
Soiled
Cotton,Linen,
Normal
Seriously Soiled
Wash Time
(Minutes)
2-5Minutes 5-10Minutes 10-15Minutes

Pyle PUCWM11 Specifications

General

Brand	Pyle
Model	PUCWM11
Category	Washer
Language	English