Pylontech Pelio-L-5.12

7 / 15
(5) Enter the S/N of the logger
▪ Method 1: Select ‘Scan’ to get the QR code of the WIFI logger
▪ Method 2: Type in the SN on the logger manually
(6) Select “Start config”, the progress will take around 1 minute
Method 1：
Scan the QR
code on Wi-Fi
logger
Method 2: Select
this icon and type
in SN manually
Type in SN
XXXXXXXXXXXXXX
XX
WIFI config will take
around 1 minute