Need help?Do you have a question about the Pyramid CR-82 and is the answer not in the manual?
Describes the CR-82 as an 8-channel electronic crossover network for multi-channel car amplifier systems.
Lists technical specifications including inputs, outputs, power supply, and performance metrics.
Controls the subwoofer output frequency at 45, 80, 150, or 200Hz.
Guides connection based on radio output type (subwoofer vs. line input).
Adjusts subwoofer phase from 0 to 180 degrees for timing compensation.
Boosts frequencies around 40Hz up to a maximum of +10dB.
Sets the subwoofer output to monaural operation.
Adjusts the level of the flat output channel by turning clockwise.
Adjusts the level of the subwoofer output channel by turning clockwise.
Matches high-pass frequency to low-pass crossover point for mid-range.
Adjusts the level of the mid-range output channel by turning clockwise.
Adjusts high-pass phase from 0 to 180 degrees for timing compensation.
Controls the high pass output frequencies.
Adjusts the level of the high pass output channel by turning clockwise.
The LED light indicates when the unit is powered on.
Identifies input and output connectors for subwoofer, front, flat, mid-range, and high pass.
Details wiring for power (+12V), remote, and ground connections.
Illustrates signal routing from car stereo/EQ to power amps via the crossover.
Provides solutions for power, distortion, low sound level, and engine noise.
Illustrates the mounting process using tapping screws and washers.
To Next Page
General
