– 7 –
TROUBLE SHOOTING SECTION
1. SIGNAL PROCESSOR DOES NOT TURN ON:
✻ Check all fuses.
✻ Check all power(positive ,remote) wire connections.
✻ Check that ground wire is properly connected.
2. LED POWER ON INDICATOR NOT GOING ON:
✻ Same as sign l remedy.
3. SOUND DISTORTION AT LOW VOLUME LEVEL:
✻ Output level not set correctly.
4. LEVEL OF SOUND IS LOW:
✻ Check input gain control ,match to deck output.
✻ Check the RCA patch cords for loose or misconnected cables.
5. A WHINING SOUND CAN BE HEARD THROUGH THE SPEAKERS
AT LOW VOLUME LEVEL WITH RUNNING ENGINE:
✻ Check the power wire(red)with good connection directly to the battery
and ground point must make good contact with chassis ground.
INSTALLATION
To Next Page
Loading...
