Need help?Do you have a question about the Pyramid Studio Pro PA-1000X and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| Channels | 2 |
| Signal-to-Noise Ratio | >100dB |
| THD | <0.05% |
| Power Output | 1000W |
| Frequency Response | 20Hz - 20kHz |
| Input Sensitivity | 0.775V |
| Input Impedance | 20k Ohms Balanced, 10k Ohms Unbalanced |
| Dimensions | 483 x 88 x 380mm (19" x 3.5" x 15") |
Details the various controls and indicators on the amplifier's front panel, including power, speakers, and meters.
Describes rear panel components such as fuse, voltage switch, AC outlet, speaker terminals, and input jacks.
Details continuous power output, total harmonic distortion, and mono bridge power ratings.
Specifies the frequency response range and input sensitivity requirements for the amplifier.
Covers input impedance, signal-to-noise ratio, speaker impedance, and voltage/fuse requirements.
Provides the physical dimensions of the amplifier unit.
Guidelines for safe electrical connection, ventilation, and avoiding environmental hazards like water and heat.
Instructions on proper handling, cleaning, avoiding foreign objects, and preventing overload.
To Next Page
