Need help?Do you have a question about the Pyramid Studio Pro PA1000X and is the answer not in the manual?
Power| input impedance | 20 k-Ohms |
|---|---|
| continuous output power stereo mode 20 Hz to 20 kHz, 8 Ohms | 70W X 2 |
| continuous output power stereo mode 1 kHz, 4 Ohms | 90W X 2 |
| maximum power stereo mode, 8 Ohms | 300W X 2 |
| maximum power stereo mode, 4 Ohms | 600W X 2 |
| thd at rated output power | 0.1% |
| frequency response | 10 Hz to 50 kHz |
| input sensitivity | 0.775V |
| signal to noise ratio A-weighted | 90 dB |
| power fuse 110-120V AC | 6A |
| power fuse 220-240V AC | 3A |
Speaker Impedance| speaker impedance A or B only | 4 - 16 Ohms |
|---|---|
| speaker impedance A plus B | 8 - 16 Ohms |
Weight and Dimensions| dimensions H x W x D, inches | 4 3/16 X 19 X 10 3/4 |
|---|---|
| dimensions H x W x D, mm | 100 X 482 X 273 |
| weight, lbs (kg) | 21.78 (9.9) |
Power| input impedance | 20 k-Ohms |
|---|---|
| continuous output power stereo mode 20 Hz to 20 kHz, 8 Ohms | 100W X 2 |
| continuous output power stereo mode 1 kHz, 4 Ohms | 120W X 2 |
| maximum power stereo mode, 8 Ohms | 400W X 2 |
| maximum power stereo mode, 4 Ohms | 800W X 2 |
| thd at rated output power | 0.1% |
| frequency response | 10 Hz to 50 kHz |
| input sensitivity | 0.775V |
| signal to noise ratio A-weighted | 90 dB |
| power fuse 110-120V AC | 6A |
| power fuse 220-240V AC | 3A |
Speaker Impedance| speaker impedance A or B only | 4 - 16 Ohms |
|---|---|
| speaker impedance A plus B | 8 - 16 Ohms |
Weight and Dimensions| dimensions H x W x D, inches | 4 15/32 X 19 X 12 |
|---|---|
| dimensions H x W x D, mm | 130 X 482 X 305 |
| weight, lbs (kg) | 26.84 (12.2) |
Power| input impedance | 20 k-Ohms |
|---|---|
| continuous output power stereo mode 20 Hz to 20 kHz, 8 Ohms | 110W X 2 |
| continuous output power stereo mode 1 kHz, 4 Ohms | 160W X 2 |
| maximum power stereo mode, 8 Ohms | 500W X 2 |
| maximum power stereo mode, 4 Ohms | 1000W X 2 |
| continuous output power bridge mode 20 Hz to 20 kHz, 8 Ohms | 250W X 1 |
| continuous output power bridge mode 1 kHz, 4 Ohms | 320W X 1 |
| maximum power bridge mode, 8 Ohms | 1000W X 1 |
| maximum power bridge mode, 4 Ohms | 2000W X 1 |
| thd at rated output power | 0.1% |
| frequency response | 10 Hz to 50 kHz |
| input sensitivity | 1V |
| signal to noise ratio A-weighted | 90 dB |
| power requirement | 120V AC, 60 Hz / 240V AC, 50Hz |
| power fuse 110-120V AC | 6A |
| power fuse 220-240V AC | 3A |
Speaker Impedance| speaker impedance A or B only | 4 - 16 Ohms |
|---|---|
| speaker impedance A plus B | 8 - 16 Ohms |
| speaker impedance bridged mode | 8 - 16 Ohms |
Weight and Dimensions| dimensions H x W x D, inches | 4 15/32 X 19 X 12 |
|---|---|
| dimensions H x W x D, mm | 130 X 482 X 305 |
| weight, lbs (kg) | 26.4 (12) |
Power| input impedance | 20 k-Ohms |
|---|---|
| continuous output power stereo mode 20 Hz to 20 kHz, 8 Ohms | 160W X 2 |
| continuous output power stereo mode 1 kHz, 4 Ohms | 210W X 2 |
| maximum power stereo mode, 8 Ohms | 900W X 2 |
| maximum power stereo mode, 4 Ohms | 1800W X 2 |
| continuous output power bridge mode 20 Hz to 20 kHz, 8 Ohms | 350W X 1 |
| continuous output power bridge mode 1 kHz, 4 Ohms | 420W X 1 |
| maximum power bridge mode, 8 Ohms | 1800W X 1 |
| maximum power bridge mode, 4 Ohms | 3600W X 1 |
| thd at rated output power | 0.1% |
| frequency response | 10 Hz to 50 kHz |
| input sensitivity | 1V |
| signal to noise ratio A-weighted | 90 dB |
| power fuse 110-120V AC | 7A |
| power fuse 220-240V AC | 3.5A |
Speaker Impedance| speaker impedance A or B only | 4 - 16 Ohms |
|---|---|
| speaker impedance A plus B | 8 - 16 Ohms |
| speaker impedance bridged mode | 8 - 16 Ohms |
Weight and Dimensions| dimensions H x W x D, inches | 5 1/8 X 19 X 12 |
|---|---|
| dimensions H x W x D, mm | 130 X 482 X 305 |
| weight, lbs (kg) | 26.84 (12.2) |
To Next Page
