Need help?Do you have a question about the Pyramid ZPA100 and is the answer not in the manual?
General| Frequency Response | 20Hz-20kHz |
|---|---|
| Input Impedance | 47 kOhms |
| Channels | 2 |
| S/N Ratio | >90dB |
| Speaker Impedance | 4 - 8 Ohms |
| Fuse | 20A |
| Signal to Noise Ratio | >90dB |
| Power Output | 100 Watts |
| Bridged RMS Power at 4 Ohms | 200W x 1 |
| Power Output at 4 Ohms | 100W x 2 |
| Dimensions (Alternate) | 9.45" x 10.43" x 2.09" |
| RMS Power at 4 Ohms | 100 watts x 2 |
Covers warnings, cautions, and numbered safety points (1-7) for safe operation and preventing hazards.
Details OSHA permissible noise level exposures and recommends hearing protection for high sound pressure levels.
Explains the function of input gain, power LEDs, signal activity, overload, fault indicators, and the power switch.
Describes input connectors, mode switch, ground lift, binding posts, Speakon outputs, power select, and fan grills.
Details input characteristics, power input, and output specifications for the ZPA100 amplifier.
Details input characteristics, power input, and output specifications for the ZPA150 amplifier.
To Next Page
