To Next PageTo Next Page
Need help?Do you have a question about the Pyronix Enforcer 32WE and is the answer not in the manual?
General| Panel Type | Hybrid |
|---|---|
| Zones | 32 |
| Wireless Zones | 32 |
| Keypads | Up to 4 |
| Areas | 4 |
| Battery Backup | Yes |
| Mobile App | Yes (PyronixCloud) |
| Weight | 1.5 kg |
| Operating Temperature | -10°C to +40°C |
| Type | Wireless |
| Communication | GPRS |
| Outputs | Programmable outputs |
| Power Supply | 230VAC |
| Humidity | 85% RH non-condensing |
Details the 32 wireless and 34 wired input control panel, range, encryption, and system capabilities.
Explains the user-friendly programming menu and the simple 'one push to learn' feature for devices.
Highlights two-way communication benefits, device awareness, and double knock for reduced false alarms.
Covers 128-bit encryption, ITDC, UDL software for remote management, and engineer diagnostics.
Explains how the GREEN/RED LED on wireless devices indicates signal strength during installation.
Describes viewing signal strength on the control panel via Snapshot and Individual views.
Outlines the simple three-step process for installing the Enforcer control panel.
Presents the available DIGI-1200 PSTN and DIGI-GSM digital communicators for the system.
Lists wireless detectors: dual-tech, PIR, pet immune, water leak, shock, smoke, and CO detectors.
Details wireless keyfobs, keypads, and repeaters for system arming and signal extension.
Covers wired keypads, tag readers, output expanders, and input expanders for system expansion.
Lists wired digital communicators and various replacement batteries for system components.
Includes the Bootloader dongle for infield firmware upgrades.
