Need help?Do you have a question about the Pyronix ENFORCER V11 and is the answer not in the manual?
General| App Compatibility | ProControl+ |
|---|---|
| Battery Backup | Yes |
| Wireless Detectors | Yes |
| Wireless Siren | Yes |
| Repeaters | Yes |
| Two-Way Wireless Technology | Yes |
| Operating Temperature | -10°C to +40°C |
| Storage Temperature | -20°C to +60°C |
| Communication Options | PSTN |
| Wireless Zones | 64 |
Explains the process for silencing an alarm using an anti-code.
Details the procedure for performing an engineer reset using the engineer code.
Describes how to identify system faults using the control panel and keyfob indicators.
Explains panel indications when the system cannot be armed due to open zones.
Describes keyfob LED indications when a fault prevents arming.
Describes activating a hold-up alarm by pressing specific keys on the keypad.
Instructions for programming the system's date and time within the Master Manager menu.
Step-by-step guide for configuring the system's Wi-Fi connection using a Wi-Fi device.
Instructions for connecting the system to Wi-Fi using the WPS method.
Introduction to downloading and setting up the HomeControl2.0 application.
Steps to create a username and add your alarm system to the app.
Instructions for connecting the HomeControl2.0 app to the alarm control panel.
Section for recording engineer and installation details.
Table for managing standard user accounts, including codes and area access.
To Next Page
