Pyronix LIGHTCAMERA User Manual

11
LIGHTCAMERA USER GUIDE
ALARM OUTPUT
This function is not supported by the LightCamera.
FLIP VIEW
Tap the mirror icon (pictured left) to ip the live stream 180°. Tap again to return the stream to the
original position.
SETTINGS OVERVIEW
Time zone
Congures the time zone so the hours are adjusted based on your location.
DST (Daylight Saving Time)
DST adjusts the time +/- 1 hour in accordance with countries observing this practise.
Date format
Alters how the date is displayed on live feeds, snapshots, recordings etc.
Light settings
Adjusts the settings of the ood lights such as brightness and activation zones.
Notication
Congures event and push notications as well as detection areas that trigger
notications.
Microphone
Enables and disables the use of the LightCamera’s on-board microphone.
Network signal
Displays the strength of the signal between the LightCamera and the wireless router.
Congure network
This is used to re-connect the LightCamera to the wireless network or connect the LightCamera to a new
network.
Storage status
Initialises the MicroSD memory cards to use with the device.
Device version
Displays the rmware version the camera is currently operating on.
Image and video encryption
If enabled, this requires anyone who the camera is shared with to enter the password when they rst attempt to
view the stream.
IR light
Enables and disables the infrared light at night. If enabled, the images are clear, black and white images. If
disabled, the image is in colour but with more image noise.

Pyronix LIGHTCAMERA Specifications

General

Brand	Pyronix
Model	LIGHTCAMERA
Category	Digital Camera
Language	English