Pyure Mini 50 - Troubleshooting Guide

Pyure Mini
TM
Owner’s Manual
9
Troubleshooting Guide
Problem Possible Cause Solution
No Keypad LED’s on
When Power Button
Pressed
Pyure Mini™ purifier not
pluggedinto an energized
electrical receptacle
Ensure electrical receptacle is
working and breaker/GFCI is
nottripped
Maintenance
Indicator Flashing
UV Optic nearing end of life
Contact local distributor for
replacement UV Optic/service
Maintenance
Indicator On
UV Optic or internal part is
notfunctioning
Contact local distributor for service
Lockout Status
on (Controls Not
Responding)
Keypad has been locked out
Refer to LOCKOUT STATUS on
page7 to unlock keypad