Q-See Presidio Series User Manual

5
Get Connected
Step 2: Connect Your Cameras
2A. Plug the camera network cable into the camera
by connecting the Ethernet cable into the camera
network port. You should hear a clicking sound as
you connect to the port.
2B. Move the white weather-proof housing up and twist
to secure the cover over the port. Tighten the base
of the cover to complete the weather-proof seal.
Step 1: Registration
Before installing, please register your device on the
Q-See Support Portal at www.Q-See.com/register to
receive critical updates and support for your system.
Registering will also help us to assist you with any
technical or warranty issues if ever necessary.
Please be sure to keep a record of your model
number(s) and to save this guide, as you will need
this information if you are ever in need of technical
or warranty support.
NOTE: Your username and password used to register your device are
not the same as those you use to log in to your system. Please write
down your username, password, and model number(s) in the spaces
provided below:
Username:
Password:
Model #:

Q-See Presidio Series Specifications

General

Brand	Q-See
Model	Presidio Series
Category	Security System
Language	English