Name: Q-See Presidio Series
Brand: Q-See
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2C. Plug the other end of the camera cable into an

available PoE port on the back of your NVR. Again,

you will hear a clicking noise when cables are

inserted correctly. Repeat steps 2A through 2C for

each camera.

Step 3: Connect NVR to Display

There are two options to connect the NVR to a display.

Option A: HDMI

1. Plug the included HDMI cable into the NVR’s HDMI

port.

2. Connect the other end of the HDMI cable to the

monitor or TV.

3. Plug the monitor or TV into a surge protector.

Questions and Answers:

Need help?

Do you have a question about the Q-See Presidio Series and is the answer not in the manual?

Q-See Presidio Series Specifications

General