Name: Q-See Presidio Series
Brand: Q-See
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Option B: VGA Monitor

1. Plug a VGA cable (not included) into the NVR’s

VGA port. VGA might not support full high definition

output.

2. Connect the other end of the VGA cable to the

monitor. A 19” monitor or larger with 1280 x 1024

resolution is highly recommended.

3. Plug the monitor into a surge protector.

Step 4: Connect Mouse

Plug the included mouse into the USB port on the

back of the NVR. If your model has two USB ports on

the back, either one will work.

19” Monitor

or Larger

Questions and Answers:

Need help?

Do you have a question about the Q-See Presidio Series and is the answer not in the manual?

Q-See Presidio Series Specifications

General